Laser tag equipment checklist before every shift

Checking your equipment before each shift takes only 10–15 minutes—and can save far more time once the games begin.

If an instructor identifies an unresponsive tagger, a loose headband, a damaged sensor, or an incorrect game setting in advance, the issue can be resolved before the players arrive rather than in the middle of a round.

The checklist below is suitable for laser tag clubs, sports clubs, children’s camps, and outdoor laser tag venues. Print it, display it in the equipment storage room, and use it before every game session.

Check the battery levels

Start with the power supply. Many equipment issues are caused by low batteries or incomplete charging after the previous shift.

Turn on every tagger and make sure it starts promptly.
Check the battery levels of all taggers, headbands, vests, checkpoints, first aid kits, bombs, and other game devices.
Set aside any equipment with a low battery and recharge it.
Make sure all chargers are connected correctly and that none of the contacts are loose.
Check that spare batteries or backup kits are available if they are used at your venue.

Tip: Make it standard practice to put all equipment on charge immediately after every shift and check the battery levels again before the next one. This reduces the risk of starting a game with equipment that is only partially charged.

Inspect the housings and fasteners

A visual inspection can reveal damage before it affects player safety or gameplay.

Inspect each tagger for cracks, chips, loose stocks, or damaged decorative components.
Check all straps, buckles, and fasteners.
Inspect the headbands and vests. Sensors should be securely attached, and wires should not be pinched, frayed, or exposed.
Make sure all buttons and triggers operate smoothly without sticking.
Check that lenses, sensors, and displays are clean.

Remove damaged equipment from service immediately and record it in the maintenance log—even if it still powers on.

Test hit registration

Before the shift begins, make sure every kit can transmit and register hits correctly.

Fire a test shot from each tagger at a compatible sensor.
Test hit registration from the front, sides, and back.
Make sure all light and sound indicators work correctly.
Check that each tagger responds to a player being hit according to the selected game settings.
Thoroughly test any equipment that players or instructors reported problems with during the previous shift.

If hits are registered inconsistently, do not issue the kit to a player until it has been inspected. A single unreliable tagger can negatively affect the experience of an entire team.

Verify the game settings

Even fully operational equipment can perform incorrectly if the wrong game scenario or parameters have been selected.

Confirm that the correct game scenario is loaded.
Check the health level, damage, reload time, ammunition, firing mode, and round duration.
Make sure players are assigned to the correct teams and that the team colors match.
Confirm that all devices use the same configuration.
If you collect game statistics, make sure the equipment is connected to the software correctly.
Save preset profiles for your most common formats, such as:
Children’s games
Adult games
Sports mode
Corporate scenarios
Tournament formats

Preset profiles make preparation faster and reduce the risk of configuration errors.

Test all additional game devices

If a scenario uses checkpoints, first aid kits, bombs, flags, bases, or other game devices, test them as thoroughly as the taggers.

Turn on each device and check its battery level.
Make sure it responds correctly to shots or player actions.
Test all light and sound indicators.
Check the team settings, timers, and victory conditions.
Position each device securely in the playing area so that players cannot accidentally knock it over or move it.

Before running a complex scenario, conduct a brief test without players. This will confirm that the devices and game logic work as intended.

Prepare the playing area and equipment issue area

Equipment checks should not end in the storage room. The playing area and equipment issue area must also be prepared for a fast, organized, and safe start.

Sort the kits by number or team.
Make sure every player will receive a tagger and a hit sensor.
Prepare a fully operational spare kit for quick replacements.
Remove unnecessary wires, boxes, chargers, and other obstacles from the equipment issue area.
Arrange the equipment so that the instructor can quickly replace a tagger, headband, or game device.

The more organized the equipment issue process is, the less time players will spend waiting between the briefing and the start of the game.

Record every fault

Problems that are not documented are likely to recur. Every venue should therefore maintain a simple maintenance log.

Record the kit number and provide a brief description of the issue.
Note when the equipment was removed from play and when it was returned.
Record recurring complaints from players and instructors.
Distinguish minor faults from critical issues.
Assign a team member to oversee equipment maintenance and battery charging.

A maintenance log helps keep equipment organized and makes it easier to plan purchases of spare parts, sensors, straps, batteries, and additional kits.

QUICK PRE-SHIFT CHECKLIST

Before admitting players, confirm that:

All taggers are switched on and fully charged.
All headbands, vests, and sensors are working correctly.
Hits are registered consistently from different directions.
The game scenario, teams, and parameters are configured correctly.
All additional game devices have been tested and positioned.
A fully operational spare kit is ready for a quick replacement.
Faulty equipment has been removed from play and recorded in the maintenance log.

Final thoughts

Regularly checking your laser tag equipment before every shift is not just a technical formality—it is an essential part of delivering a reliable customer experience.

Players may not see the preparation carried out before a shift, but they will notice the results: games start on time, hits are registered correctly, and technical interruptions are kept to a minimum.

Use this checklist as a starting point and adapt it to your venue, equipment, and game formats.